The Rego-Fix Family

SWISS Precision ENGINEERED and BUILT

Every micron counts!

Three systems – one brand

Our brand unites three different toolholding systems. Each systemhas different strengths to fit your machining needs, but at the heart ofeach system lies our aim for toolholding excellence.

PG powRgrip® System 

powRgrip - https://youtu.be/q1-11xSOa10

Features and Benefits 

• Highest transmittable torque and superior run-out

• Tool change in less than 30 seconds• Clamps tool shanks down to .1181” (3mm)

• Collets available in inch and metric sizes• Run-out of .0001” (3 microns)

• Balanceable -- Just add the REGO-FIX Hi-Q® balancing rings

• Can use coolant through tooling

• Tool presetting feature

For high-end machining with a total system TIR ≤ 0.0001" (3 μm) at 3 x D

CAT Holders

BT Holders

CAPTO Holders

HSK Holders

PG collet holders

https://youtu.be/lBTjgMGnDBk

PG collets

Taper accuracy AT3 Clamping rangefrom 0.0079" up to 1"

Surface finishmax. Ra 0.25

Special surface treatment ensures longevity

High transferable torque

up to 1,100 Nm

Clamps all shanks with tolerance h6

Vibration dampening for high RPM

A holistic system approach

All parts are designed for exclusive fit to ensure toolholding excellence.

ER System

Our ideal system for standard machining

ER collet holders

Runout TIR ≤ 0.0001" (3 μm)

Taper accuracy AT3

Surface finish max. Ra 0.25

Factory balanced

ER collets

Offer Wide clamping range: from ER 8 up to ER 50 and for diameters from 0.0079" up to 1.375"

Clamping capacity 0.0197" to 0.0787"

Runout TIR ≤ 0.0004" (10 μm) at 3 x D for ER standard

Runout TIR ≤ 0.0002" (5 μm) at 3 x D for ER-UP

CF collets have three (3) coolant grooves allowing coolant to flow along the shank of the tool being

Cooling Flush System

Nuts "CF"

https://www.yo"utube.com/watch?v=lsklGMY1j4Q

ER clamping nuts

Collet-locking system

Balanced by design

Special surface treatment improves transferable torqueand protects against corrosion

micRun® SystemThe ultimate precision toolholding system

micRun® System

Every micron counts...Closing the gap between the powRgrip® and the ER System,the micRun System convinces with a total system runout of ≤3 μm./.00012"

Swiss high precision An excellent runout accuracy paired with low vibration not only increases your machining quality, but enhances your overall productivity and increases yourtool life, thus successfully lowering your cutter costs.

With a total system runout of ≤3 μm at 3 x D, the micRun® Systemprovides all the benefits of excellent runout accuracy.

This is why micRun® is the ideal system for all micro machining applications and is successfully used in industries likewatchmaking or medical engineering.

In addition, our uniquecollet-locking system retains the collet safely inside the nut.

This minimizes your risk of faulty operations or possible damages which may occur if the collet accidentally fallsto the ground. Another great benefit of our collet-locking system is the tool-free removal of the collet.

micRun® System <Click here for brochure

TORCO BLOCK

Click HERE For Brochure

TORCO-BLOCK Fast and accurate tool assemblyfor ER and micRun® toolholders

TORCO-BLOCK The only tool assembly device in the market that is easy and safe to use with integratedtorque measuring. Usability ranges from ER 11 to ER 32, from 1 to 22 mm and boasts all standard machine interfacesfrom HSK to steep taper.

TORCO-BLOCK Click Here

Take Operator ERROR OUT

Torco Block provides:

*Use any suitable wrench and still be able to correctly measure torque and reduce possibility of cracked or damaged holders

*Minimum force needed

*Easy-to-read torque limits reducing the possibility of over tightening

*Quick-change function for different taper adapters within seconds with only one 4 mm Allen-key

*Accident-free assembling of cutting tools

*Easy-to-charge adapters and torque ringsquick-lock interface inserts

*Required footprint 170 x 270 mm

*Correct installation of pull studs with normal wrenches

*Full or overhang mounting possible

*TORCO-BLOCK supplied inclusive indicator rings IR

REGO-FIX YouTube Video 

Product introductions:

powRgrip - https://youtu.be/q1-11xSOa10

secuRgrip

 https://youtu.be/HCLitMWa8-A

intRlox

https://youtu.be/b3PelPfCzw8

 reCool

https://youtu.be/VXMZWdKGbWA

Call HPM TODAY to Discuss your Requirements!

The Rego-Fix Family

Tool holders of ER collets and Holders (They INVENTED)

powRgrip Systems