+GF+Machining Solutions / New England States
Please contact HPM PRESIDENT: Ken Otzel
.... Representing GF since 1988
"Agie-Charmilles-Mikron"
Ken Otzel (508)958-5565
otzelk8@gmail.com or otz1@aol.com
Office: 52 Fox Run Road, Bellingham, MA 02019
________________________________________________________________________
Other Contact: +GF+ Machining Solutions
Regional Sales Manager:
Sean Szczygiel (413)333-6884 sean.szczygiel@georgfischer.com
All Connecticut, Western Massachusetts, Vermont and Western New Hampshire
--------------------------------------------------------------
** HPM is Your SOURCE FOR ~
+ EDM Agie-Charmilles (Electrical Discharge Machining)
+ HSM/HIGH SPEED MILLING Mikron/Bumotec
+ LASER MARKING, ENGRAVING, MACHINING / TEXTURING
+ Microlution Micro Milling, FEMTO Laser Solutions
+ Additive Manufacturing EOS
+ System 3R and EROWA MILLING /EDM Tooling,
Fixtures and Automation Cells
~ FOBA Laser and Marking Systems
High quality, "Zero Defect" production and 100% traceability - ALL - while lowering production cost per part with Highest ThruPut possible.
FOBA integrated software, point and shoot, and Vison Technolgy provide high-end laser technology and INDUSTRIAL Built equipment that solves all your toughest marking requirments.
~ TITAN <CLICK ON) Small Hole CNC EDM Drill “Made in the USA” Quality and Production oriented EDM drilling systems
~ BUMOTEC Bar stock milling/turning centers. Also, Special machines that have been designed to respond precisely to the various demands of the watch-making and jewellery industry. Our engineers have developed a modern tool for goldsmith artisans.
~System 3R Tooling for EDM (Wire and Sinker EDM, Work Holding Devices and AUTOMATION)
~ REGO-FIX Every micron counts Tool Holding Systems, Swiss High Precsion Engineered and Built
~ EROWA Tooling for EDM (Wire and Sinker EDM, Work Holding Devices and AUTOMATION)
HPM
52 Fox Run Road
Bellingham, MA 02019
National News: Don't be taken in by the Press or New Services, New England companies are busy in manufacturing sector
![]() |
||||
![]() |
At $64.30 million, May manufacturing technology orders in the Northeast Region were up 8.4% when compared with the $59.33 million total for April and up 88.4% when compared with May a year ago. The year-to-date total of $305.87 million is 92.4% more than the comparable figure for 2010.
|
Click here for GFAC AgieCharmilles High Speed Electrical Discharge Machining (EDM) and Milling
We our very proud to announce that High Performance Machinery and Tornos will partner for all New England states.
.................THINK PARTS, THINK TORNOS!
Click HERE for Site Information
The most complete line in Swiss Turn available.
... and Now the NEW EVO DECO is Here!
The complete Tornos/ESCO/Almac product range includes horizontal milling machines with 3 or more axes, vertical milling machines, high speed machining centers, and drilling machines. We offer "Bar Feed" Solutions to automation.
Replace that old CAM swiss with a NEW CNC ESCO today and start $$$$$ saving money! $$$$$$$$$$$$$$$$$$
Coil feed instead of bar will gain you thousands of parts per day, no reminants of waste and nearly 3 NEW machines can fit in one Old CAM bar fed area.
Optimize yourmicromachining process
+GF+
MIKRON MILLING
See Above VIDEO Of MIKRON 5 Axis MILL, Starting Production packages at $265,985
HPM Represents:
+GF+ Machining Solutions:
NEW ERA IN WIRE EDM TECHNOLOGY is HERE... The CUT Series and Form Series
____________________
INTRODUCING the latest +GF+ Sinker RAM EDM from GF "Form S" Series for MICRO EROSION
Sharpest results to meet your application demandsReduce electrode wear by up to 50 percent and confidentlymachine the tiny radii required in electronic componentmanufacturing, thanks to the micromachining technology ofthis solution’s latest-generation Intelligent Speed PowerGenerator (ISPG).
Master details for impeccablegeometrical qualityInnovative hardware to boost your qualityCost-effectively achieving the extraordinary fineness of detail on the smaller molds required for yourcustomers’ finished products is at the heart of the FORM S 350. This solution simplifies micromachiningof highly detailed geometries—even in mass production—thanks to new features to enhance yourprecision, speed and productivity.
CLICK HERE Form S for BROCHURE
_______________________________________________
The Answer to removing PARTS from Your Additive Metal BUILD PLATES..With ZERO DAMAGE..
World's ONLY Engineered and Designed ADDITIVE VERTICAL WIRE EDM Just for Additive
GF AgieCharmilles WIRE EDM for ... ADDITIVE PARTS Separation
NEW SPECIFICALLY DESIGNED and ENGINEERED for ADDITIVE PARTS, NO DAMAGE, Automated Basket Turns parts upside down and removes them for Build Plate *** ONLY Wire EDM DESIGNED to remove work from Build plates
1. Dimension of the base plate will increase
• From 9.8” x 9.8” (250x250mm) to 19.7 x 19.7”
(500x500 mm) even bigger in the future
2. AM will be a Mass Production Technology
• Full automated process is needed
3. “Integrity” of the part
• Avoid contamination (medical / aerospace)
• Avoid damages on the parts during the handling
NEW Lower COST Wire EDM
CUT C 350/600 <Click
Starting at $119,900
with Chiller - C SERIES
NEW +++ May 2023
CUT F 360 and 600 WIRE EDM Series with UNIQUA Control
Advanced Wire EDMS "P" PRO Series < Click On
CUT P 350 PRO
CUT P 550 PRO
CUT P 800 PRO
-------------------------------------------------
CUT P 1250 LARGE WIRE
Four Systems medium to VERY LARGE
NEWEST "UNIQUA" Wire EDM CONTROL arrived 6/22 Click HERE
UNIQUA
UNIQUA is the newest GF Machining Solutions human/machine interface (HMI)for wire EDM machines. It represents the pinnacle of more than a century of EDM technology (AGIE and CHARMILLES) – and the perfect combination of optimal functionality adjusability (ergonomics) from our previous HMIs.
FORM P Series SINKER EDM Technology
Three ULTRA Accurate and FAST EDM Sinker Systems
FORM P 350
FORM P 600
FORM P 900
Exceptional Efficiency & Precision
The FORM P 350, FORM P 600 and FORM P 900, combine productivity and flexibility
AgieCharmilles EDM (Electric Discharge Machine) Mikron (High Speed, High Performance Machining centers 3/5 axis) and LASER 3/5 axis Texturing and Hole Drilling systems - ALL with Complete Automation concepts!
http://www.gfms.com/content/gfac/country_US/en.html
2008,2009,2010,2011,2012,2013, 2011,2012,2013,2014,2015,2016,2017,2018 Our company HPM finishes in Top Three in the USA.
+GF EDM for Mold & DIE
Aerospace and MedTec
Aerospace Applications
High Speed Machining
+GF MIKRON MILL S Series (Speed and Accuracy)
MILL S 400, 500, 600 and 800 (3 Axis)
MILL S 400 U and 600 U (5 Axis)
The MIKRON MILL E Series (500U and 700u) bring unsurpassed quality and speed in a incredibly TWO affordable complete packages Productivity and Automation. Starting at under $300,000 these systems have NO equal. Click here for brochure
+GF LASER TECHNOLOGY
NANO and FEMTO
for ..Mold and Die, MedTec, Consumer Products and Aerospace
+GF MACHINING SOLUTIONS WEB SITE
___________________________________________________
TITAN EDM-
CNC EDM Hole Drilling Made in The USA
_____________________________________________
For Your Robotics Solutions Click here
High Performance Machinery is your complete source for "EDM and High Speed Machining, High Performance Machining" and products to support both of these machining requirements.
We represent EDM (Agie-Charmilles) and High Speed, High Performance Machining centers (Mikron and Bumotec)
----------------------------------------------------------------
IFP - Industrial Part Cleaning Solutions
|
|
| | |
GOD
BLESS
AMERICA!
HPM provides 40 PLUS years of machine tool sales experience. Our sales team offers unique insight, and our sales approach is "applications" focused; Solutions to YOUR requirements!
We will work with your engineering and floor technicians to assure the proper selection of a machine and work through implementaion .
We also offer service and support of our new and USED EDM systems. We have a "STOCK" of used EDMs and we have an established network to offer trades of older equipment with focus on Agie, Charmilles and Fanuc EDMs systems.
EDM Drilling
--------------------------
FOBA Laser Marking & Engraving
Banning and Rotary
FOBA Automation
FOBA
50th Anniversary
_____________
IFP Industrial Part Washing Systems (Self Contained)
KEN OTZEL President
Mobile #
(508)958-5565
email links below
otz1@aol.com otzelk8@gmail.com
Jim Dow
EDM Applications, Training, and Service Consultant
+GF+
EDM,
LASER Machining and Texturing
&
MILLING by
..GF Machining Solutions
GF offers small EDM Wire Systems and LARGE EDMs
EDM AUTOMATION CELLS
+GF+ Machining Solutions
Agie-Charmilles -Mikron
Microlution -
System 3R Tooling and Robotics
Ask HPM about GF's Privilege Club
.. receive Valuable Points for Each and every Purchase of Consumables items Purchased from +GF+ for Future Discounts on Parts, Consumables Items, & Training
HPM **ACCEPTS ALL FORMS of CREDIT CARDS **
Copyright 2023 High Performance Machinery, LC. All rights reserved.
High Performance Machinery
52 Fox Run Road
Bellingham, MA 02019
(508)958-5565